General Download

DATAPATH WITH CONTROLLER

PC VERILOG CODE

module ProgramCounter
(
input [4:0]d_in,
input reset, clk,
output reg [4:0] d_out
);
always @(posedge clk)
if (reset)
 d_out <= 5'b00000;
else
 d_out <= d_in;
endmodule

AC VERILOG CODE 

module Accumulator
(input [7:0] d_in,
input load, clk,
output reg [7:0] d_out
);
always @(posedge clk)
if (load)
 d_out <= d_in;
initial
 d_out=8'h00;
endmodule

ALU VERILOG CODE

module ALU
(
input [7:0]a, input [7:0]b,input [2:0]opcode,
output reg [7:0]alu_out
);
always @(opcode,a,b)
 case(opcode)
  3'b000:alu_out = a + b;
  3'b001:alu_out = a - b;
  3'b010:alu_out = a&b;
  3'b011:alu_out = a|b;
  3'b100:alu_out = ~b;
  3'b101:alu_out = a^b;
  3'b110:alu_out = a~^b;
  default:alu_out = 0;
 endcase
endmodule

ADDER VERILOG CODE

module CounterIncrement
(
input [4:0]a, input [4:0]b,
output[4:0] adder_out
);
assign adder_out = a + b;
endmodule
-

MUX-1 VERILOG CODE

module Mux2to1_6Bit
(
input [4:0] i0, i1,input sel,
output[4:0] mux_out
);
assign mux_out = sel ? i1 : i0;
endmodule

MUX-2 VERILOG CODE

module Mux2to1_8Bit
(
input [7:0]i0,i1,input sel,
output [7:0]mux_out
);
assign mux_out =sel?i1:i0;
endmodule

CONTROLLER VERILOG CODE

module Controller(
input [2:0] opcode,
output reg rd_mem,wr_mem,ac_src,ld_ac,pc_src,jmp_uncond);
always @(opcode)
 begin
 rd_mem = 1'b0;
 wr_mem = 1'b0;
 ac_src = 1'b0;
 pc_src = 1'b0;
 ld_ac = 1'b0;
 jmp_uncond=1'b0;
 case (opcode)
 3'b000: //load accumulator from memory
  begin
   rd_mem = 1'b1;
   wr_mem = 1'b0;
   ld_ac = 1'b1;
   ac_src = 1'b0;
  end
 -
 3'b001:
  begin
   rd_mem = 1'b1;
   wr_mem = 1'b0;
   ld_ac = 1'b1;
   ac_src = 1'b0;//SUBTRACT
  end
 3'b010:
  begin
   rd_mem = 1'b1;
   wr_mem = 1'b0;
   ld_ac = 1'b1;
   ac_src = 1'b0;//AND
  end
 3'b011:
  begin
   rd_mem = 1'b1;
   wr_mem = 1'b0;
   ld_ac = 1'b1;
   ac_src = 1'b0;//OR
  end
 3'b100:
  begin
   rd_mem = 1'b1;
   wr_mem = 1'b0;
   ld_ac = 1'b1;
   ac_src = 1'b0;//NOT
  end
 3'b101:
  begin
   rd_mem = 1'b1;
   wr_mem = 1'b0;
   ld_ac = 1'b1;
   ac_src = 1'b0;//XOR
  end
 3'b110:
  begin
   rd_mem = 1'b1;
   wr_mem = 1'b0;
   ld_ac = 1'b1;
   ac_src = 1'b0;//XNOR
  end
 3'b111:
  begin
   rd_mem = 1'b0;
   wr_mem = 1'b0;
   ld_ac = 1'b0;
   ac_src = 1'b0;
   pc_src=1'b1;
   jmp_uncond=1'b1;//JUMP
  end
 default:
  begin
   rd_mem = 1'b0;
   wr_mem = 1'b0;
   ac_src = 1'b0;
   pc_src = 1'b0;
   ld_ac = 1'b0;
  end
 endcase //end case
 end //end always
endmodule

DATA MEMORY VERILOG CODE

module DataMemory (
input rd, wr,
input [4:0] abus,
input [7:0] in_dbus,
output reg [7:0] out_dbus);
reg [7:0] dm_array [0:31];
always @(rd,abus)
 begin
 if (rd)
  out_dbus = dm_array [abus];
 end
 always @(wr,in_dbus) //always @(wr or abus or in_dbus)
 begin
 if (wr)
  dm_array [abus] = in_dbus;
 end
-
initial
begin
 dm_array[0] = 8'h01;
 dm_array[1] = 8'h02;
 dm_array[2] = 8'h03;
 dm_array[3] = 8'h04;
 dm_array[4] = 8'h05;
end
endmodule

INSTRUCTION MEMORY  VERILOG CODE

module InstructionMemory (input [4:0] abus, output reg [7:0] dbus);
reg [7:0] im_array [0:12];
always @(abus)
dbus = im_array [abus];
initial
begin
im_array[0]= 8'h00; // Initialize Accumulator with 0 and do addition with content of DataMemory at address 0.
im_array[1]= 8'h21; // Subtract content of accumulator with content of DataMemory at address 1.
im_array[2]= 8'h42; // Logical AND of accumulator with content of DataMemory at address 2.
im_array[3]= 8'h63; // Logical OR of accumulator with content of DataMemory at address 3.
im_array[4]= 8'h84; // Logical NOT of accumulator with content of DataMemory at address 4.
im_array[5]= 8'hA4; // Logical XOR of accumulator with content of DataMemory at address 4.
im_array[6]= 8'hC4; // Logical XNOR of accumulator with content of DataMemory at address 4.
im_array[7]= 8'hEA; // Unconditional Jump to 01010 address of Instruction memory.
im_array[10]= 8'h00; // Addition with content of DataMemory at address 0.
im_array[11]= 8'hE0; // Unconditional Jump to 00000 address of Instruction memory.
end
endmodule
-
DATAPATH MEMORY VERILOG CODE

module DataPath (
input reset,ld_ac, ac_src, pc_src, clk,
output [2:0] opcode,
output [4:0] im_abus,
input [7:0] im_dbus,
output [4:0] dm_abus,
output [7:0] dm_in_dbus,
input [7:0] dm_out_dbus,
output [7:0] ac_out,alu_out);
//wire [7:0] ac_out,alu_out,mux2_out;
wire [7:0]mux2_out;
wire [4:0] pc_out, adder_out,mux1_out;
ProgramCounter pc(.d_in(mux1_out),.reset(reset),.clk(clk),.d_out(pc_out)); //instantiation
of all module
CounterIncrement adder(.a(pc_out),.b(5'b00001),.adder_out(adder_out));
Mux2to1_6Bit mux1(.i0(adder_out),.i1(im_dbus[4:0]),.sel(pc_src),.mux_out(mux1_out));
Accumulator ac(.d_in(mux2_out),.load(ld_ac),.clk(clk),.d_out(ac_out));
ALU alu(.a(ac_out),.b(dm_out_dbus),.opcode(opcode),.alu_out(alu_out));
Mux2to1_8Bit mux2(.i0(alu_out),.i1(dm_out_dbus),.sel(ac_src),.mux_out(mux2_out));
assign im_abus = pc_out;        //assign im_abus = 6'b000000;
assign opcode = im_dbus [7:5];
assign dm_abus = im_dbus [4:0]; //abus for DataMemory.
assign dm_in_dbus=ac_out;
endmodule

SMPL. CPU MEMORY  VERILOG CODE

module CPU( //The CPU
input clk,reset,
output rd_mem,wr_mem,
output [4:0] im_abus, input [7:0] im_dbus,
output [4:0] dm_abus, output [7:0] dm_in_dbus,
input [7:0] dm_out_dbus,
output [7:0] ac_out,alu_out,
output [2:0] opcode);
//wire [2:0] opcode;
-
wire ac_src,ld_ac, pc_src,jmp_uncond;
DataPath dpu
(.reset(reset),.ld_ac(ld_ac),.ac_src(ac_src),.pc_src(pc_src),.clk(clk),.opcode(opcode)
,.im_abus(im_abus),.im_dbus(im_dbus),.dm_abus(dm_abus),.dm_in_dbus(dm_in_dbus),.dm
_out_dbus(dm_out_dbus),.ac_out(ac_out),.alu_out(alu_out));//dj
Controller cu
(.opcode(opcode),.rd_mem(rd_mem),.wr_mem(wr_mem),.ac_src(ac_src),.ld_ac(ld_ac),
.pc_src(pc_src),.jmp_uncond(jmp_uncond));
endmodule

TEST BENCH SMPL. CPU MEMORY VERILOG CODE

module testBench;
 reg clk;
 reg reset;
 wire [7:0] im_dbus;
 wire [7:0] dm_out_dbus;
 wire rd_mem;
 wire wr_mem;
 wire [4:0] im_abus;
 wire [4:0] dm_abus;
 wire [7:0] dm_in_dbus;
 wire [7:0] ac_out,alu_out;
 wire [2:0] opcode;
CPU uut (
.clk(clk),.reset(reset),.rd_mem(rd_mem),.wr_mem(wr_mem),
.im_abus(im_abus),.im_dbus(im_dbus),.dm_abus(dm_abus),
.dm_in_dbus(dm_in_dbus),.dm_out_dbus(dm_out_dbus),.ac_out(ac_out),.alu_out(alu
_out),.opcode(opcode));
InstructionMemory IM (.abus(im_abus),.dbus(im_dbus));
-
DataMemory DM
(.rd(rd_mem),.wr(wr_mem),.abus(dm_abus),.in_dbus(dm_in_dbus),.out_dbus(dm_out_dbus)
);
initial
begin
 clk = 0;  reset = 1;//im_dbus =8'hxx;dm_out_dbus = 8'b00000000;
 #20 reset = 1'b0;
 #500 $finish;
end
always
 #10 clk = ~clk;
Endmodule

RTL DIAGRAM



TEST BENCH WAVE FORM :

Data memory :
Location   00  01  02  03  04
Data    01  02  03  04  05
Instruction memory :
Location   0  1  2  3  4  5  6  7  8  9
Instruction  00  21  42  63  84  A4  C4  EA  00  E0
(* operation with accumulator with location in last 5 bit)
Ans (in acc in hex) 00  01  FF  03  07  FA  FF  05  06  07